Front Inputs - ProScan PS36810 User Manual

MAKING CONNECTIONS
3,
4.
5.
Slowly move the remote control across the front of the component
(VCR or cable box) while you press the power button on and off.
You must press and release the power button each time you move
the remote (holding down the button won't work).
When the component turns on, you've located the sensor.
Place the wands of the G-LINK cable underneath your VCR and/or
cable box (see instructions below).
PLACING THE WANDS UNDER THE VCR AND/
OR CABLE BOX
Place the wands of the G-LINK cable underneath your VCR and/or
cable box. Place them about one inch away from the remote control
sensor.
_have a cable box, just coil the
Connect to G-LINK jack
on the back of the TV.
FRONT INPUTS
The monitor has front inputs for convenience; one set of audio/video
(A/V) inputs, a headphone jack and two client USB ports. Look for a
hinged door and gently lift the cover open. Please note that the
illustration below shows a typical front input layout. The exact look of
the jacks or monitor pictured here may be different than yours.
NOTE
When you plug in headphones, the
monitor's internal and external speakers
are automatically turned off.
@@@@
A/V jacks USB ports
Headphone jack
When connecting a device that uses a [
monaural cable, such as some
J
camcorders, use the left input jack to get
sound from both speakers.
16