Monitor, Vcr, And A Satellite Receiver - ProScan PS36810 User Manual

MAKING CONNECTIONS
Monitor, VCR, and a Satellite Receiver
1. Connect the coaxial cable carrying your television signal (off air or
cable) to the antenna input on the VCR.
2. Connect a coaxial cable to the VCR's antenna output and to the
ANTENNA/CABLE INPUT jack on the monitor.
3. Use RCA cables to connect the VCR's audio/video output INPUT1
on the monitor.
4,
Use RCA cables to connect the satellite receiver's audio/video
output to INPUT2 on the monitor. If your satellite receiver has an
S-Video output, you can make the video connection by using the
S-Video jacks instead.
RECE{VER
88- 88 8o
Viewing the Components
1. Turn on the monitor and the component(s) you want to view.
2. Press the TV button on the remote control.
3. Press the WHOolNPUT button on the remote control to scroll
through the video inputs.
• The VCR can be viewed on the VID1 input.
• The satellite receiver can be viewed on the VID2 input.
Direct Channel Tuning
You can set up the monitor to
automatically tune to the correct input.
This is called Autotuning. (See "Setting
Up" for more information.)