Labeling Channels - ProScan Owner's Manual

Labeling Channels

The labeling feature lets you program names (or labels) for
the channel numbers. The name you programmed will then
appear on the screen below the channel number whenever the
channel number is displayed. Each name can contain up to
four characters, and you'll be able to assign up to 64 names.
Listed below are the letters and characters from which you'll
be able to choose when programming the channel labels:
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
(blank space) ! " # $ % & ' ( ) á + , - / .
0 1 2 3 4 5 6 7 8 9
: ; < = > ? @
Labeling Channels
with or without remote
1 Repeatedly press the button to select
MENU
then press + to display the setup functions.
Mute
Video Menu
Audio Menu
Setup Menu
2 Repeatedly press the
button to select
MENU
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label
Parental Ctrl: Off
3 Press + to enter the
CHAN LABEL
frames will appear under the channel number.
10:52 AM 07
↑
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label Use Vol
Parental Ctrl: Off
and
SETUP MENU
.
CHAN LABEL
function. Four blank letter
4 Select the channel number you want to label by pressing the
up or down button (or by pressing two number
CHANNEL
buttons).
10:52 07
↑
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label Use Vol
Parental Ctrl: Off
5 Press and hold the up or down button on the remote
VOLUME
control until the letter or character you want appears on the
screen. Pressing up sequences through the characters
VOLUME
in alphabetical order. Pressing
letters in reverse order.
10:53 07
H
↑
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label Use Vol
Parental Ctrl: OFF
6 Then press + to move to the next letter frame. Pressing –
moves you back to the previous letter frame.
10:56 07
H B
↑
Captioning: Off
Sleep Timer 0:00
Set Alarm
Chan Label Use Vol
Parental Ctrl: Off
7 Repeat steps 5 and 6 until the name is complete. You can
now label another channel, if desired, by selecting the channel
number and repeating steps 5 and 6.
8 When finished, the display will automatically disappear from
the screen in a few seconds. Your labels will remain in
memory until you erase them.
Erasing Channel Labels
To erase a channel label, first follow steps 1-4 and then press
on the remote control.
CLEAR
down sequences the
VOLUME
19