Schedule - ProScan PS36810 User Manual

MENUS AND FEATURES
Schedule
The Schedule menu lets you create timers for either viewing or
recording programs. The GUIDE Plus+ Gold System allows one-button
recording if you have positioned the G-LINK cable wand in front of
your VCR. See the Setting Up section of this manual for more details on
positioning the G-LINK cable.
To schedule a program to watch or record:
1. Press GUIDE to bring up the GUIDE Plus+ Gold System.
2. Highlight a program within the Channel listing.
3. Select Watch or Record from the Action buttons bar. The timer is
then automatically logged into the Schedule menu.
4. If you select Record, make sure to place a blank tape in the VCR
and leave the VCR off.
The program information window will display a confirmation when
you have successfully created a timer to watch or record.
To remove or change the frequency (daily, once, or weekly) of a
scheduled event, access the Schedule Menu from the Menu bar.
1. Press GUIDE to bring up the GUIDE Plus+ System.
2. Press MENU to highlight the Menu bar.
3. Use the arrows to highlight the Schedule menu selection.
4. Use the up and down arrows to highlight the program you want to
edit. Then use the Schedule Menu Action Buttons as described in
the next section.
Schedule Menu Action Buttons
When viewing the Schedule menu the following Action buttons will
appear on the bar:
ScheduleMenu
Action Buttons
Schedule
Menu
Selection
f
If you have selected two programs to
watch or record which begin at the same
time or overlap, you will receive a time
conflict message. The GUIDE Plus+
Gold system will not schedule a
conflicting timer, therefore you must
choose between the two programs.
J
i"]I
Remove Highlight the Watch or Record timer you wish to remove
from the schedule and press 1 on the remote.
Change Highlight the Watch or Record timer you wish to change
and press 3 on the remote to toggle the frequency between the
following choices:
DAILY records the same program each day Monday through
Friday.
ONCE records only on that day.
WEEKLY records the program each week at the same time.
Messages
Occasionally you will receive messages regarding your GUIDE Plus+
Gold System, as well as special programming information. You can
access these messages from the Message Menu on the Menu bar.
To read messages:
1. Press MENU on the remote to select the Menu bar.
2. Use the arrows to highlight the Messages menu selection.
3. Highlight the message you wish to read by using the arrows.
5O