Using The Whoolnput Button - ProScan PS36810 User Manual

USING THE REMOTE
MENU Brings up the Main menu and selects highlighted items. When
in VCR mode, it functions as a PROGRAM button.
CLEAR Removes any menu or display from the screen and returns
you to normal viewing.
(0-9) Number Buttons Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press
one digit, release, press the other, release. To enter a three-digit
channel, press and hold the "1" button until "1" and two dashes (- -)
appear, release, then add the second two. Example: to tune to channel
123, press and hold 1 until "1 " appears, release the 1 button and
then press 2, and 3.
WHOoINPUT In TV mode, press to toggle through the available
input sources (VID1, VID2, VlD3, FRONT, last channel, VGA1, VGA2,
component input). In SAT mode, press to select available channel lists
(RCA, GE, and PROSCAN products only).
ANTENNA Functions as TV/VCR button in VCR mode and TV/
receiver button in satellite mode.
REVERSE,PLAY, FORWARD, REC°VCR+, STOP, PAUSE If
programmed, provides transport control for some remote-controllable
VCRs, DVD players, laserdisc players, tape decks, and CD players.
PressingREC°VCR+ when using the GUIDE Plus+ System sets the VCR
to record a program.
PIP Brings up the small picture-in-picture window. Press again to
remove the PIP window. (See "PIP Feature" later in this manual for
more information about using Plff)
SWAP Swaps the main picture with the PIP window.
CH CTRL Selects the picture window, (that is, the main or PIP
window) to be changed by the CH A (channel up) or CH v (channel
down) buttons.
RESET Resets picture quality controls to the Bright Lighting Picture
Control Preset. Point and select to choose a different Picture Control
Preset. Also used to reset the settings in a menu, such as the Parental
Controls menu.
USING THE WHOo INPUT BUTTON
Use the WHO.INPUT button to scroll through the available input
channels and view components you have connected to the monitor.
1. Press TV to place the remote in TV mode. Make sure that the
component you want to view is turned ON.
2. Press WHO° INPUT to tune to an available input channel.
3. Continue to press the WHOo INPUT button to scroll through the
input channels.
Modes of Operation
Because this universal remote can
control several different components
(DVD player, VCR, Cable Box, etc.) it
uses operational modes triggered by the
component buttons. For example if you
want the remote to control the monitor,
you would press the TV button to put the
remote into TV mode before you could
control the monitor.
27