Set The Dvd Channel (Autotuning); Set The Sat/Cable Channel (Autotuning) - ProScan PS36810 User Manual

SETTING UP
SET THE DVD CHANNEL (AUTOTUNING)
The next step lets you set the DVD channel. When you set the DVD
channel, you're telling the monitor what input channel to tune to
when you press the DVD button on the remote.
Indicate which input you used to connect a DVD player. If you don't
have a DVD player connected to the monitor, skip this step. If you skip
this step now, you can access it later by selecting Channelfrom the
Main menu and selecting Autotuning.
1,
2.
From the setup screen, choose "Use monitor with a DVD."
From the Set DVD Channel menu (shown below), point to the
choice that matches the way you have your DVD connected to
the monitor.
3. Press OK to select it and continue.
SET THE SAT/CABLE CHANNEL (AUTOTUNING)
The next step lets you set the SAT/CABLE channel. When you set the
f
SAT/CABLE channel, you're telling the monitor what channel to tune to [
when you press the SAT,CABLE button on the remote.
L
Indicate which input you used to connect a satellite receiver, a cable
box or a set top digital converter. If you don't have one of these
components connected to the monitor, skip this step. If you skip this
step now, you can access it later by selecting Channel from the Main
menu and selecting Autotuning.
1. From the setup screen, choose "Use monitor with cable or
satellite."
2. From the Set SAT/CABLE Channel menu (shown below), point to
the choice that matches the way you have your satellite receiver,
cable box, or HD receiver connected to the monitor.
Note that the (S)VGA2 input can be used |
to connect an HD receiver so you can
J
receive high definition signals.
23