Auto Channel Search; Set The Time - ProScan PS36810 User Manual

SETTING UP
AUTO CHANNEL SEARCH
The first step of the setup routine "autoprograms" channels into the
channel list. Note: If you skip Auto Channel Search now, you can
access it later through the Channel Menu.
1. Press OK to tell the monitor to begin searching for channels. The
monitor will begin searching for channels and give you a report of
its progress.
2. When the channel search is complete, press OK on the remote to
continue the setup process.
SET THE TIME
The next step in the setup is to set the time. If you have already set up
the GUIDE Plus+ Gold system, you will not see the Set Time menu.
Alternate Navigation Method
In addition to using Point & Select, you
can also select a menu item by entering
the item number with the number
buttons on the remote.
Press CLEAR at any time to remove all
displays from the screen and return to
normal viewing.
Many VCR user manuals refer to a
PROGRAM button. The MENU button on
this remote works as a PROGRAM button
in VCR mode. Other manuals may refer
to a SELECTbutton. The OK button on
this remote works as a SELECT button.
I You can also complete the setup process |
by pressing MENU on the remote and
J
selecting Setup.
1,
Use the left and right arrows to point to the hour and minutes
spaces. Use the up and down arrows to scroll through the numbers
and change from AM to PM.
2. Press OK to continue.
19