Monitor, Vcr, Satellite Receiver, And A Dvd Player - ProScan PS36810 User Manual

MAKING CONNECTIONS
Monitor, VCR, Satellite Receiver, and a DVD Player
1. Connect the coaxial cable carrying your television signal (off air or cable) to the antenna input on the VCR.
2.
3.
4.
Connect a coaxial cable to the VCR's antenna output and to the ANTENNA/CABLE INPUT jack on the monitor.
Use RCA cables to connect the VCR's audio/video output to INPUT1 on the monitor.
Use RCA cables to connect the satellite receiver's audio/video output to INPUT2 on the monitor. If your satellite
receiver has an S-Video output, you can make the video connection by using the S-Video jacks instead.
5. Use RCA cables to connect the DVD player's audio/video output to INPUT3 on the monitor. If your DVD player has
an S-Video output, you can make the video connection by using the S-Video jacks instead.
Component Video
If your DVD player has a component
video output, we recommend you use the
component video input on the monitor
instead of the standard video or S-Video
connection.
RECEIVER
Viewing the Components
1. Turn on the monitor and the component(s) you want to view.
2. Press the TV button on the remote control.
3. Press the WHO•INPUT button on the remote control to scroll
through the video inputs.
• The VCR can be viewed on the VlD1 input.
• The satellite receiver can be viewed on the VID2 input.
• The DVD player can be viewed on the VlD3 input.
Direct Channel Tuning
You can set up the monitor to
automatically tune to the correct input.
This is called Autotuning. (See "Setting
Up" for more information.)
10