Back Panel - RCA VR564 User Manual

BACK PANEL
AUDIO VIDEO
out O- 0
,_ 0-0
IN FROM O
ANT.
VHF/UHF
OUT TO TV
3CH. 4
_E3
3 CH. 4 Switch Selects the channel to which you will tune
the TV to see the VCP, picture if you connect the VCR using
one of the basic hookups.
AUDIO and VIDEO IIN 1 Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a TV or VCR, when it is connected to
these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or
cable system when attached.
OUT TO TV Jack Pa.sses signal to "IV using the cable supplied.
64