Movie; Advance - RCA VR564 User Manual

,
2.
3.
Insert a tape that has been previously recorded.
Press 4 to select the Mark an unmarked tape feature.
Position the tape where you want the marking to start
using PLAY, FWD, and REV buttons.
i Set the tape to the
:point at which you want
to start marking.
When the tape is ready.
press MENU to begin.
Press CLEAR to cancel
,
Press MENU 1:o begin the marking process. The VCR will
play the tape until it finds six seconds (or more) of blank
tape or until the tape reaches the end. It will then rewind
the tape to the starting point you set and begin marking
the commercial segments.
MOVI EI_ I_ADVANC E
MOVIE,,ADVANCI- helps you locate certain parts of
prerecorded movie.,; (rented or purchased). The feature works in
two ways: 1) you can go to the beginning of the movie or 2) you
can skip from one preview to the next. MOVIE, ,ADVANCE
works only on cassettes recorded in the SP speed with the safety
tab removed.
1. To select MOVII_=,,ADVANCE, insert a tape with the safety
tab removed and press SEARCH. The following menu
appears.
What type of tape
is this?
I Purchased/Rented Movie
2 Home Recording
3 Other
Press CLEAR
1:o
cancel
,
Press I if the tape is a purchased or rented movie, press 2 if
it's a recording made at home, or press 3 if it is something
else, you don't know, or you do not want to select
MOVIE,,ADVANCE.
MOVIE_, I_ADVANCE is a trademark of SRT, Inc.
I MOVIE, ,ADVANCE works only on 1
cassettes recorded in the SP speed
with the safe_:y tab removed.
45