Clock shows
incorrect
time or date
•
Power interruption.
Automatic
clock set was not turned
on or did not work properly.
Check time zone and daylight-
savings settings.
•
Make sure VCR or cable box is tuned to channel carrying XDS information.
•
Auto clock set is not supported
by digital satellite
receivers. Set the clock manually.
Time did not adjust for daylight-saving
time
•
Check to make sure daylight-saving feature is set correctly.
VCR makes
noise when
stopped
•
VCR is removing
tape from heads. This is normal. The head cylinder inside the VCR will continue
to rotate for a few
minutes after you put the VCR in the stop mode.
'Will not AUTO
CHANNEL
SEARCH active
channels
correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
•
If Detect Automatically
was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using eithel _CABLE
TV or ANTENNA instead.
•
May not be necessary if using a cable box for all channels. Contact your local cable company for more information.
Tape plays back in slow
motion
•
Press PLAY to return to normal playback.
Cannot
select channels
over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature
is set to CABLE.
Cassette
with
safety
tab removed
does not start
to play automatically
•
Check to make sure the Auto Play ON/OFF feature
is set to ON.
'TIMER indicator
flashes
•
Check to make sure there is a cassette in the VCR when a timer recording
is set.
Time counter disappears
during searching
•
This is normal.
On-screen
menus
appear
in English,
French,
or Spanish
•
Check
LANGUAGE
feature.
•
Press one of the TRACKING
up or down
buttons
to minimize
the noise.
Index,
Zero, and Blank search features
do not operate
•
These features are not available if the MOVIE_ I_ADVANCE feature
is activated.
67