Timer Recording - RCA VR564 User Manual

TIMER RECORDING
You can set up as many as eight timer recording programs.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language
0 Exit
2. Press 2 to display the TIMER RECORDINGS menu.
TIMER RECORDINGS
I Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
0 Exit
3. Select 1 to Create a New Program.
How often should this
program record?
I One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
4. Select how often you want the program to record.
Program I (One Time)
Channel --
Start Time --:--
End Time
Start Date --)--l--
Tape Speed SLP
Press MENU to cancel
5. Enter the data for the program with the number buttons.
The data includes the channel number (press INPUT to select
the line input), start time including AM or PM, and end time.
The start date is automatically entered based on the VCR
clock. The date and/or speed can be changed when flashing.
Timer Recording Information
Clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record
the program.
The output of your cable box appears
in the Channel item of the timer
recording menu if you've set up the
VCR for a cable box for all channels.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
The TIMER inclicator appears in the
display when you turn off the VCR
and a timer recording has been set. It
flashes if there is no tape in the VCR.
Turn on the cable box and tune it to
the channel you want to record
before the timerecording is to begin.
_
29