Blank Search; Pro-Tect Plus Tm Locking Feature; Tracking - RCA VR564 User Manual

BLANK SEARCH
The VCR searches for blank portions of the tape that are more
than six seconds in length.
1. Insert a recorded tape and press STOP.
2. Press SEARCH on the remote until the BLANK SEARCH
menu appears.
3. Press FWD to begin searching. A message appears on the
screen if a blank area is not found.
4. Press STOP to stop blank searching.
PRO-TECT PLUS
TM
LOCKING FEATURE
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won't work.
To Lock: Press and hold PWR, VCR1, or VCR2*DVD on the
remote for approximately six seconds. SAFE appears in the
display to let you know the feature is activated.
To Unlock: Press and hold PWR, VCR1, or VCR°DVD on the
remote for approximately six seconds.
BLANK SEARCH
Press FWD to begin
searching for blank
section of tape.
Press SEARCH to exit
BLANK SEARCH
Searching for
blank tape...
Press SEARCH to exit
TRACKING
Your VCR has automa'tic tracking which removes the streaks or
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRACKING buttons to remove the
streaks or snow. You can also use tracking when you pause a tape
to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording--only playback.
I f MOVIEI, I, ADVANCE is selected,
Blank Search is net available
Locking Your VCR:
If a timer recording is programrned,
make sure your W=R is turned off.
Locking your VCR prevents 1"he VCR
from being acciidentally turned on.
50