To Add Or Remove Channels; Time And Date; Auto Clock Set Feature - RCA VR564 User Manual

TO Add or Remove Channels
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have weak
signals or you don't want to watch them.
1.
2.
3.
Press MENU to display the VCR MAIN MENU.
Press 4 to display the CHANNELS menu.
Press 2 to display the ADD/REMOVE CHANNELS screen. Use
CHANNEL up or down or number buttons to go to the
channels you want to remove or add.
ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press MENU to exit
'TIME AND DATE
The VCR gives you two ways to set the time and date. The Auto
Clock feature which enables the VCR to update the clock each
time you turn off the VCR. The Auto Clock feature is
advantageous because it updates the time for you automatically.
The second way is entering the time and date manually into the
menu system.
AUTO CLOCK SET FEATURE
The Auto Clock feature is set to ON at the factory. In the ON
setting, the VCR looks for a channel carrying XDS (Extended Data
Services) information and updates the clock using the
Coordinated Universal Time. There are certain steps that are
required, such as Auto Channel Search, setting the Time Zone,
and setting the Daylight Savings feature, before the Auto Clock
feature works.
Selecting Channels
The CHANNEL up and down buttons
access those channels active in your
VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
12