Table of Contents
Advertisement
Installation, cont'd
Video connections
N The matrix switcher does not alter the video signal in any way. The signal
N The MVX matrix switchers can also switch RGBS, RGsB, RsGsBs, component
a
N Most laptop or notebook computers have an external video port, but they
b
Sync Impedance switches
N The MVX VGA 128 A does not have the described Sync Impedance switches.
c
Figure 2-3 — Sync Impedance switches
N An input producing an out-of-sync display — a display that is rolling vertically
2-4
MVX VGA A Matrix Switchers • Installation
output by the switcher is in the same format as the input.
video, S-video, or composite video with the appropriate adapters.
RGB video inputs — Connect the analog computer-video sources to these
15-pin HD female connectors.
require special commands to output the video to that connector. Also, a laptop's
screen shuts off once the external video port is activated. See the computer's
user's guide for details, or contact Extron for a list of common laptop keyboard
commands.
RGB video outputs — Connect RGBHV video displays to these 15-pin HD
female connectors for each output.
Sync Impedance switches — The MVX 1212 VGA A, MVX 168 VGA A, and
MVX 1616 VGA A matrix switchers have Sync Impedance switches on the rear
panel for outputs 1 through 8 (figure 2-3) to compensate the impendance for
different cable types and lengths. The switches provide a way to condition
the output, enabling the sync to be properly passed from output to the
display.
SYNC IMPEDANCE
50
75
1
2
3
4
5
6
7
8
1 2 3 4 5
6 7 8
OUTPUT
MVX 1212 A, MVX 168 A
and MVX 1616 A
Each switch provides the option of selecting either 50 ohms or 75 ohms. The
50 ohms position is required only when a sync problem is encountered. The
normal position is 75 ohms.
and/or tearing horizontally — could indicate an impedance problem.
4
Advertisement
Table of Contents
