Table of Contents
Advertisement
Operation, cont'd
3.
N Figure 3-45 shows the current level (+8 dB) displayed on the MVX 128 A, an
1
1
The output LEDs display the selected input's audio level.
In this example, the output buttons and the View and Esc buttons display an audio gain level of +8 dB.
= Lit LED,
Figure 3-45 — Select an input and read the audio level
The output LEDs display the selected input's audio level.
In this example, the output buttons and the View and Esc buttons display an audio gain level of +8 dB.
= Lit LED,
Figure 3-46 — Level display on a 16-output-LED switcher
4.
3-28
MVX VGA A Matrix Switchers • Operation
Press and release the Input 5 button (figure 3-45).
8-ouput-LED switcher.
Press and release the Input 5 button.
The LED lights.
2
3
4
5
F
2
3
4
5
OUTPUTS
= Unlit LED,
F = Fast blinking LED
Figure 3-46 shows the same level (+8 dB) as in figure 3-45, but displayed on a
16-ouput-LED switcher, such as an MVX 1212 A.
= Unlit LED,
Press and release the View (
audio level by 1 dB.
Press and release the View (
decrease the input audio level by 1 dB per button push. Note the output
button indication changes that occur each time the View (
6
6
7
8
<
) button once (figure 3-47) to decrease the input
<
) button several more times (figure 3-47) to
VIEW
ESC
The View and Esc LEDs display
the polarity (gain or attenuation).
The View and Esc LEDs
display the polarity (gain
or attenuation).
<
) button is pressed.
Advertisement
Table of Contents
