Extron electronics MVX VGA A User Manual page 81

Programmer's Guide, cont'd
Command/response table for SIS commands (continued)
Command
Information requests
Information request
Request part number
N There are two separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the
overall control firmware, and the latest optional Extron firmware update, which is available at www.Extron.com.
Query controller firmware
version
Example:
Query controller firmware
version (verbose)
Response description:
Example:
Description
n.nn-1.00(1.06-16x16 Series -Wed, 22 Feb 2006 00:00:00 GMT)-1.00*(1.06-16x16 Series -Thu, 16 Mar 2006 16:39:21 GMT)
Response:
Meaningless data
for this switcher model
Request system status
Response description:
Example:
4-12 MVX VGA A Matrix Switchers • Programmer's Guide
ASCII command
(host to switcher)
I
N
Q
Q
0Q
Controller firmware version-updated firmware version
0q
* indicates the version running
MVX firmware version
S
+3.3V•+5V•-5V•+15V•-15V•temperature (degrees fahrenheit)
-15V power system at -15.15V
3.29•5.04•-5.14•15.27•-15.15•120.20
3.3V power system at 3.29V Temperature 120.20 degrees
Response Additional
description
(switcher to host)
X2) X2! X2) X2!]
V X •A X
X2@]
See appendix A for part
numbers.
X1!]
]
The factory-installed
1.23
controller firmware version
is 1.23 (sample value only).
X1! X1@ X1@]
Provide a detailed status of
- -
the MVX controller firmware
and any firmware upgrade.
• The firmware that is
• A caret (^) indicates that
• ?.?? indicates that
]
Upload date and time
Updated firmware version
X2# X2# X2# X2# X2# X2$]
•
• • • •
]
running is marked by an
asterisk (*).
the firmware has a bad
checksum or an invalid
load.
firmware is not loaded.