Installing The Software - Extron electronics MVX VGA A User Manual

Matrix Software
Matrix Switchers Control Program
The Windows-based Extron Matrix Switchers Control Program communicates with
the switcher via the rear panel Remote RS-232/RS-422 port and the front panel
Configuration (RS-232) port to provides an easy way to set up ties and sets of ties.
The program is compatible with Windows 2000 and Windows XP. Updates to these
programs can be downloaded from the Extron Web site (http://www.extron.com).

Installing the software

The program is contained on the Extron Software Products CD-ROM, disk B.
Install the software as follows:
N For full functionality, install both of the following programs:
1.
Figure 5-1 — Software CD window
2.
3.
Figure 5-2 — Software installation
5-2 MVX VGA A Matrix Switchers • Matrix Software
• The Matrix Switchers Control Program
• The Firmware Loader
Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 5-1).
Click the Software tab (figure 5-1).
Scroll to the desired program and click Install (figure 5-2).