Using The Vcr Tray - Mitsubishi VS-5041 Owner's Manual

Using the VCR tray
Your Mitsubishi Projection TV has a built-in VCR tray for your
convenience. (If you do not need the tray, remove it by loosening
the screws.)
To use the tray:
Fix the VCR to the tray by
passing the belt t]hrough the
hole on the Ul0_perside of the
legs.
\
"Warning: To make sure the VCR is stable at all times, fix il; to the Projection
TV as shown in the illustration.
O Join the belt together as
shown.
BELT
Do not place a VCR over 16kg (351b) on the tray.
Do not place more than one VCR on the tray.
Take the VCR off the tray before moving tile Projection TV.
For keeping set from toppling under the influence of earth-
quake or the other emergency, fix the set using the clamp
attached on the set back as shown.
98 Chapter 5: Troubleshooting