Mitsubishi VS-5041 Owner's Manual page 55

Setting the clock (cont.)
D Important:
Set the clock
Auto clock On
Day Monday
Clock 10:00 am
Time zone Eastern
• Daylight savings On
Use ADJUST to select.
Then press ENTER.
Press MENU to return 1o
First Time Set-Up Menu,
If you follow daylight savings
time, set "Daylight savings" to
"C)n" using the ADJUST but-
tons. If you do not follow
daylight savings time set it to
"Off." Press ENTER.
• At this point, you have pre-
pared the Projection TV to set
its clock automatically.
The screen will return to the "First Time Set-Up" menu.
The Projection TV can only set the clock automatically when there
is a broadcaster in :your area that is sending the current time via
Extended Data Services (XDS). The clock will start just after the
Projection TV receives the time data.
Set the clock
• Auto clock Off
Day - -
Clock - -
Time zone - -
Daylight savings --
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
F:irsl Time Set-Up Menu.
setting the clock yourself
• Set "Auto clock" to "Off' using
the ADJUST buttons. Then,
press the ENTER button.
Set the clock
• Day Monday
Clock - -
Use ADJUST to select.
Then press ENTER.
Press MENU to relum to
First Time Set-Up Menu.
o' Select the "Day" using the
ADJUST buttons. Then, press
the ENTER button.
Set the clock
Day Monday
• Clock 10:00 am
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
First Time Set-Up Menu,
" Set the "Clock" using the
ADJUST buttons.
'o After you haw.' set the "Day"
and "Clock," press the ENTER
button to start the clock.
The screen will return to the "Firs
'rime Set-Up" menu.
56
Chapter 3: Operating Your Projection TV