Mitsubishi VS-5041 Owner's Manual page 57

Adding and deleting channels
Either "In memory" or
"Not in memory" will
appear.
Important:
After all available channels have been memorized automatically,
channels with weaker signals can be added or deleted by using the
following procedure.
First Time Set-Up
Set the clock
Memorize channels
_. Add/delete channels
Set A/V Network
Align colors
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
O Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
O ;Select "First Time Set-Up"
"using the ADJUST buttons;
then, press ENTER.
O ;Select "Add/delete channels"
• asing the ADJUST buttons;
then, press ENTER.
Add/delete channels
Antenna Ant-A
Channel 006
In memory
Use ADJUST to select
another channet.
Press CANCEL to delete.
Press MENU to return to
First Time Set-Up Menu.
O The "Add/delete channels"
screen will appear. Select the
channel you would like to add
or delete using the ADJUST
buttons.
If a channel is labeled "in
:memory," use the CANCEL
button to remove it from
memory. If a channel is labeled
"not in memory," use the
ENTER button to add it to
memory
When you are finished adding
and deleting channels, press
the HOME button to return to
normal TV viewing.
In this menu, you can also use the CHANNEL buttons to change
channels.
You can switch between the antennas (Antenna
A and Antenna
B)
by pressing the input: button (INPUT).
58 Chapter 3: Operating Your Projection TV