Mitsubishi VS-5041 Owner's Manual page 40

Projection TV + Mitsubishi products that have
AN Network terminals
>Important:
The A/V Network is a special system that Mitsubishi developed to
make it easier to use many products together. When the supplied
cable is connected between two Mitsubishi products with the A!V
Network, you can point the remote control at one product and it
will "pass" the remote control command to the other.
equipment you will need
• 1 A/V network cable (included
with the Projection TV).
procedure
O Connect one end of an A/V network cable to the ACTIVE AiV
NETWORK terminal on the back of 'the Projection [I57.
O Connect the other end of this cable to the A/V NETWORK IN
terminal on the back of a Mitsubishi component that has A/V
network terminals.
You can now point your component remote (such as a VCR
remote) directly at the television. The A/V cable will "pass" the
remote commands to the component,,
The method of connecting the A/V netwerk can change, depending
on which components you have and the way you plan to use your
equipment. More detailed information is contained in the owner's
guide of each particular Mitsubishi component.
40 Chapter 2: Connecting Your Projection TV