Mitsubishi VS-5041 Owner's Manual page 93

Troubleshooting (cont.)
Problems
Possible Solutions For More Information
The remote control doesn't
work.
Check that the batteries are
installed correctly.
Check that the select button
is set to TV.
See "Getting ready to use
the remote control" in
Chapter 1 for an explanation
of how to install batteries in
the remote control.
See "Remote control buttons
and functions" in Chapter 1,
which expi[ains where the
select buttons are located.
Be sure that you are point-
ing the top of the remote
control toward the Projec-
tion TV from a distanc.e of no
more than 20 feels.
See "Getting ready to use
the remote control" in
Chapter 1, which contains
pointers for u,;ing the remote
control.
The Projection TV takes
several seconds to respond
to button commands.
• Use the ENTER button to
avoid delays.
See "Changing channels" in
Chapter 3, which explains
the function of the ENTER
button.
You can't access a channel. Be sure that the channel you
want to view is programmed
into memory.
Check that the Projection
TV is tuned to the correct
input source (antenna) for
that channel.
See "Memorizing channels"
in Chapter 3, which explains
how to prcgram channels
into the Projection TV's
memory.
See "Selecting the input
source" in Chapter 3, which
explains how to change the
input source.
96 Chapter 5: Troubleshooting