Mitsubishi VS-5041 Owner's Manual page 50

Changing channels
_Important:
Your Projection TV offers you tbur ways of changing channels once
their numbers have been programmed into channel memory:
• selecting a channel sequentially using the automatic channel
scan feature,
• directly accessing a channel by pressing the number buttons,
• using the quick view option to switch to a particular memorized
channel, and
• using the Super Quick View function to switch between chan-
nels on a user-chosen list.
To change channels faster, use either of the following' procedures:
• Enter three digits for every channel number, using zeros where
needed. (For example, enter "004" to view channe'l 4 and "028"
to view channel 28.)
• Press the ENTER button after selecting the number of the
channel. (For example, press "4" and "ENTER" to view
channel 4.)
Cable stations channel numbers 0 and greater than 1_26 are unas-
signed. TV stations 0, 1 and 7(1 through 999 are unassigned. If
these channel numbers are pressed, the channel remains un-
changed.
Getting Started 51