Mitsubishi VS-5041 Owner's Manual page 62

Using video mute
When you use the video mute function, your Projection TV will
display a blue screen whenever it is receiving a very weak TV
signal or a weak signal from a VCR. The sound is also turned off. If
there is a case where you might wish tc t13zviewing a weak signal,
you can turn the video mute off,
Cuslomize VJewinq
Rename the inputs
Select Language
_' Use Video mute
Use Power restore
Use Advanced PIP
Use ADJUST to seleat.
Then press ENTER.
Press MENU to return to
TV Main Menu,
Use Video mute
I_ Automatic
Off
Use ADJUST to select,
Then press ENTER.
Press MENU to return to
Customize Viewing Menu,
q[]} Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
O Select "Customize Viewing"
using the ADJUST buttons;
then, press the ENTER button.
Selecl: "Use Video mute" using
the ADJUST buttons; then,
press the ENTER button.
O
Use the ADJUST buttons to
select "Automatic" to turn video
mute on or "Off' to turn video
mute off.
Press the ENTER or MENU
button to return to the "Cus-
tomize Viewing" menu.
Getting Started 63