Mitsubishi VS-5041 Owner's Manual page 91

While the PIP image is on the screen:
• The PIP function buttons (SOURCE, VCR-CH, ENTER, right/
left, adjust up/down, PAUSE) will all work as they do with
standard PIP.
• The CHANNEL and number buttons (10-911 w ill automatically
control the small PIP image. You cannot change channels on the
main image.
When you press the PIP button on the remote to turn off the PIP
image:
• CHANNEL, the number buttons, and all other functions will
work normally again.
_>Important:
_Important:
_>Important:
_>Important:
If you turn off the Projection TV while it is set to EXT-1, it will
return to the last channel you viewed on Antenna-A or AzLtenna-B
when you turn the Projection TV back on.
If you leave the Projection TV turned on, set to EXT-1, but the
Projection TV is not receiving a signal on EXT-1, it will automati-
cally turn off after five minutes. (If you use a TV menu during this
time, the Projection TV will turn off five minutes after you stop
using the menus.)
If you turn the Projection TV's Home Theater feature on, then the
Projection TV's A/V Network setting will automatically be set to
"Off." You will not be able to use the Active L_V Network features
QUICK PROGRAM, AUTO PLAY or TWO TUNER PIP. ]if you
want to use the Active A/V Network features, set Home Theater to
"OFF" and A/V Network to "Active".
You should not press the PIP button while you are watching a
channel that is not receiving any broadcasts. You will not. be able to
see the small PIP image, and you will not be able to change chan-
nels on the main image. You may need to _u_.moff the Projection TV
and turn it back on, change to a channel that is receiving a broad-
cast, and begin again.
Using the Active A/V Network Feature 93_