Operations; Power - Extron electronics IN1508 User Manual

Extron electronics in1508 scaling presentation switcher user's manual
Hide thumbs Also See for IN1508:
Table of Contents

Advertisement

Color/Tint control button — The Color/Tint button selects and deselects the
display color and tint adjustment status indicator bars. The adjustment range
for both color and tint is from 0 to 127.
Input type
RGB
YUVp
RGBcvS
YUVi
NTSC S-video
PAL S-video
Composite NTSC
Composite Pal
Zoom button — The Zoom button selects and deselects the Zoom status
indicator bar. Use the
zoom (enlargement) is applied to the image.
Pan button — The Pan button selects and deselects the horizontal and vertical
Pan status indicator bars. Use the
(H) or vertical (V) pan status indicator bar. Use the
and right or up and down.
Aspect Ratio button — The Aspect Ratio button selects and deselects the
aspect ratio setting selection box control. The aspect ratio options are 4:3 and
16:9. The default is 4:3.
Sharp button — The Sharp button selects and deselects the sharpness setting
adjustment status indicator bar. Sharpness uses variable filtering to affect
input picture detail and definition.
Phase button — The Phase button selects and deselects the phase setting
adjustment status indicator bar. The phase adjustment range is 0 to 31.

Operations

The following paragraphs detail the power-up process and then describe the menu
system, the picture, and the selection of the front panel security lockout.

Power

Power is applied when the power cord is connected to an AC source. When AC
power is applied, the switcher performs a self-test that cycles all of the front panel
LEDs on and off from left to right. An error-free power up self-test sequence leaves
the selected input LED and the selected Output Rate LED on. If the picture-in-
picture feature was turned on when the switcher was powered down, the PIP On
LED and a secondary input LED are also lit.
The selected input, the picture adjustments, and other current settings are saved in
non-volatile memory. When power is applied, the latest configuration is retrieved.
The Color/Tint control affects only certain interalaced component video,
composite video, and S-video, as shown in the following table.
Color
Tint
No
No
No
Yes
Yes
Yes
Yes
Yes
and buttons to increase or decrease how much
Pan is available only for an image that has been zoomed in.
IN1508 Scaling Presentation Switcher • Operation
No
No
No
No
Yes
No
Yes
No
and
buttons to highlight the horizontal
and buttons to pan left
3-9

Advertisement

Table of Contents
loading

Table of Contents

Save PDF