Table of Contents
Advertisement
Enter button — The Enter button:
8
•
•
•
See "Main menu system", on page 3-16, and "Picture adjustments", on
page 3-25, for details.
Remote Control Buttons
To control the switcher with the hand-held
IN1508 Remote control (figure 3-8), aim the hand-held
unit at the IR detector on the switcher and press the
desired buttons on the remote. The maximum
operating range is 30 feet.
Picture-In-Picture (PIP) buttons — The PIP
9
buttons function identically to the front panel PIP
buttons. See "Picture-in-picture controls" and
on page 3-5.
On/Off button — The PIP On/Off button toggles
the PIP function on and off. When lit, the front
panel PIP On LED indicates that the switcher's
picture-in-picture function is on.
Swap button — The PIP Swap button toggles the
primary and secondary pictures between the main
image and the PIP window.
Input Selection buttons — The Input Selection
10
buttons select an input to scale and output. The
front panel Input LEDs indicate the selected input.
The Input Selection buttons function identically to the front panel Input
buttons. See "Input controls" and
Mute/Freeze buttons — The Mute and Freeze buttons blank the screen
11
and/or silence the audio and freeze the video. Press the buttons to toggle the
mutes and freeze mode on and off.
Video Mute — The Video Mute button switches the output to a blank screen.
The blank screen is deselected when a new input is selected. On-screen
displays are still available when the video is muted.
Audio Mute — The Audio Mute button silences the audio output. The audio
mute is deselected when a new input is selected.
Activates a highlighted submenu or function in the IN1508 main menu
system.
Exits a slider-type status indicator bar control.
Saves a changed value in a selection box control.
If PIP mode is off (the front panel PIP Mode On
LED is off), the Swap function continues to
work, toggling between the most recently
selected low-resolution input and the most
recently selected high-resolution input. Unlike
when PIP mode is on, however, the unselected
input is not displayed in a PIP window.
Video mute mutes the video signals only. Separate H and V sync, composite
sync, or sync-on-green (depending on the output format selected) is always
output to ensure that the connected display does not lose sync.
IN1508 Scaling Presentation Switcher • Operation
9
10
5
,
4
VIDEO
MUTE
11
12
SIZE
ZOOM
13
SHARP
Figure 3-8 — IR
remote control
on page 3-3.
2
PIP
ON/OFF
SWAP
6
7
8
AUDIO
A/V
MUTE
MUTE
FREEZE
MENU
ENTER
CONT/
COL/
CENTER
BRT
TINT
ASPECT
PAN
RATIO
PHASE
IN1508
REMOTE
3-7
Advertisement
Table of Contents
