Table of Contents
Advertisement
•
Color/Tint: Color increases and decreases the color intensity of the
picture. Tint is a relative measure of the amount of white in a given
color and adjusts the picture's color toward red or green.
The color adjustment is also available by using the front panel or IR
remote control to select Menu > Picture > Color in the main menu system
(see "Color status indicator bar", on page 3-19).
The tint adjustment is also available by selecting Menu > Picture > Tint in
the main menu system (see "Tint status indicator bar", on page 3-19).
•
Zoom (IR remote control only): Zoom enlarges a portion of the scaled
image.
This adjustment is also available by using the front panel or IR remote
control to select Menu > Input > Zoom in the main menu system (see
"Zoom selection", on page 3-17).
•
Pan (IR remote control only): Pan shifts the center of the image on an
image that has been zoomed in on.
Pan is available only for an image that has been zoomed in.
This adjustment is also available by using the front panel or IR remote
control to select Menu > Input > Pan in the main menu system (see "Pan
selection", on page 3-17).
•
Sharpness filter (IR remote control only): The adjustment range is from
0 to 63.
This adjustment is also available by using the front panel or IR remote
control to select Menu > Picture > Sharpness in the main menu system (see
"Sharpness status indicator bar", on page 3-19).
•
Fine pixel phase (IR remote control only): The adjustment range is from
0 to 31.
This adjustment is also available by using the front panel or IR remote
control to select Menu > Input > Advance > Phase in the main menu system
(see "Phase status indicator bar", on page 3-38).
3.
For the aspect ratio selection box, use the
forth between the two selections: 4:3 and 16:9.
This adjustment is also available by using the front panel or IR remote control
to select Menu > Input > Aspect in the main menu system (see "Aspect ratio
selection", on page 3-17).
4.
Repeat steps 1 and 2 for each image adjustment to be made for that input.
5.
If you want to set picture adjustment on another input, press the appropriate
input button.
IN1508 Scaling Presentation Switcher • Operation
and buttons to toggle back and
3-29
Advertisement
Table of Contents
