Advertisement
Install
or store where it will not be exposed
to temperatures
below freezing
or exposed to the weather.
Properly
ground washer to conform
with all governing
codes and ordinances.
The base opening must not be obstructed
by carpeting
when the washing
machine is installed
on a
carpeted
floor.
In countries
where there are areas which may be subject
to infestation
by cockroaches
or other
vermin,
pay particular
attention
to keeping the appliance
and its surroundings
in clean condition
at
all times.
Any damage which may be cause by cockroaches
or other vermin will not be covered
by the
appliance
guarantee.
m Transit
belts
The appliance is fitted with transit bolts to prevent internal damage during transport.
, Packing and all transit bolts
must be removed before using
the washer.
:_ When unpacking the base, be
sure to remove the additional
packing support in the
middle of the base packing.
on models.)
m Removing
transit
belts
1. To prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts along with the rubber bungs.
• If they are not removed, it may cause
heavy vibration, noise and malfunction.
2. Unscrew the 4 bolts with
the spanner supplied.
3. Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the spanner
for future use.
• Whenever the appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps supplied.
Advertisement
