Advertisement

OWNER'S MANUAL
WASHING MACHINE
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
ENGLISH
WM89*0H*A
www.lg.com
MFL71776110
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
Rev.00_021622

Advertisement

Table of Contents
loading

Summary of Contents for LG WM89 0H A Series

  • Page 1 OWNER'S MANUAL WASHING MACHINE Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. ENGLISH WM89*0H*A www.lg.com MFL71776110 Copyright © 2022 LG Electronics Inc. All Rights Reserved. Rev.00_021622...
  • Page 2: Table Of Contents

    Sorting Laundry Loading the Washer Adding Cleaning Products Control Panel Wash Cycles Cycle Modifiers Options and Extra Functions 32 SMART FUNCTIONS Using LG ThinQ Application Smart Diagnosis Function 36 MAINTENANCE Regular Cleaning Periodic Maintenance Care in Cold Climates 42 TROUBLESHOOTING...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Safety Messages Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages.
  • Page 4 • Use this appliance only for its intended purpose. • If the product has been submerged in water, sitting in standing water, or waterlogged, do not come in contact with the product and immediately contact an LG Electronics Customer Information Center for instructions before resuming use.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. • Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when using laundry products.
  • Page 6: Caution Statements

    IMPORTANT SAFETY INSTRUCTIONS CAUTION STATEMENTS CAUTION • To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: Installation • Install the product on a firm and level floor. Operation •...
  • Page 7: Product Overview

    • For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products. Front View...
  • Page 8 PRODUCT OVERVIEW Accessories Product Specifications Model WM89*0H*A Included Accessories Electrical 120 VAC @ 60 Hz Requirements Min. / Max. Water 20 psi - 120 psi (138 kPa Pressure - 827 kPa) 29'' X 40 3/4'' X 32 7/8'' Dimensions (Width X (73.7 cm X 103.5 cm X Height X Depth) 83.5 cm)
  • Page 9: Installation

    INSTALLATION INSTALLATION Before Installing Installation Overview Please read the following installation instructions first after purchasing this washer or transporting it to another location. Choosing the Proper Location Unpacking and Removing Shipping Material Connecting the Inlet Hoses Connecting the Drain Hose Leveling the Washer Final Installation Check WARNING...
  • Page 10: Choosing The Proper Location

    10 INSTALLATION WARNING • Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel- Do not contact the following parts while the appliance is energized: pump, valve, motor, control board. Tools Needed •...
  • Page 11: Unpacking And Removing Shipping Material

    INSTALLATION Dimensions and Clearances CAUTION • Failure to remove shipping materials can cause 1'' (2.5 cm) excessive noise and vibration. 29'' (73.7 cm) 1/4'' (0.5 cm) Unpacking Shipping Material *Some models do not ship with drum support. Stacking or Pedestal Installation Lift the washer off the foam base.
  • Page 12: Connecting The Water Inlet Hoses

    • Do not reuse old hoses. Use only new hoses faucet. when installing the washer. Old hoses could leak or burst causing flooding and property damage. Contact an LG Customer Information Center for assistance in buying hoses. NOTE • Periodically check the hoses for cracks, leaks, and wear, and replace the hoses every five years.
  • Page 13: Connecting The Drain Hose

    INSTALLATION • Let the water drain into a bucket, and check beyond 66" (168 cm), the drain function will be the water temperature to make sure you’ve increasingly affected. connected the hoses to the correct faucets. • Never create an airtight seal between the hose and the drain with tape or other means.
  • Page 14: Leveling The Washer

    14 INSTALLATION Leveling the Washer hoses with the provided tie strap (ribbed side on inside). The drum of the washer spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be a solid, level surface. CAUTION 24 - 96 "...
  • Page 15: Final Installation Check

    INSTALLATION Check the level again. rock. If the washer rocks, level the washer again. • Push or rock the top edges of the washer gently to make sure the washer does not rock. If the washer rocks, readjust the Final Installation Check leveling feet.
  • Page 16 16 INSTALLATION Testing the Washer Check if the washer is properly installed and run a test cycle. Load the washer with 6 thick bath towels (approximately 6 pounds). Press the Power button. Select the Speed Wash cycle. Press the Start/Pause button to start the wash cycle.
  • Page 17: Operation

    OPERATION OPERATION Before Use WARNING • To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before operating this appliance. Operation Overview Sort laundry and load the washer. • Sort laundry by fabric type, soil level, color and load size as needed. Open the door and load items into the washer.
  • Page 18: Sorting Laundry

    18 OPERATION End of cycle. • When the cycle is finished, a melody sounds. Immediately remove the clothing from the washer to reduce wrinkling. • Check around the door seal when removing the load for small items that may be caught in the seal. NOTE •...
  • Page 19: Loading The Washer

    OPERATION • Remove the stuffing from pillows and cushions before washing the covers. Failure to do so can cause excessive vibration, resulting in damage to the washer, clothes, nearby objects, walls, and floor. Fabric Care Labels Many articles of clothing include a fabric care label. Using the chart below, adjust the cycle and option selections to care for your clothing according to the manufacturer’s recommendations.
  • Page 20: Adding Cleaning Products

    20 OPERATION • The washer will not fill or operate with the door maximum. Use less detergent for soft water, open. light soil, or smaller loads. • Use extra care when measuring 2X and 3X CAUTION concentrated detergents because even a small amount of extra detergent can lead to problems.
  • Page 21 OPERATION • The amount of detergent added for the Pre- wash option is 1/2 the amount recommended for the main wash cycle. For example, if the main wash cycle requires one measure of detergent, add 1/2 measure for the Pre-wash option. Main Wash Detergent Compartment This compartment holds laundry detergent for the main wash cycle.
  • Page 22 22 OPERATION NOTE • Follow the manufacturer’s recommendations when adding bleach. Never add more than one cup, and do not exceed the maximum fill line or the bleach may be dispensed immediately and damage fabrics. Using too much bleach can also damage fabrics.
  • Page 23: Control Panel

    OPERATION Control Panel Control Panel Features Power On/Off Button • Press this button to turn the washer on or off. • Pressing this button during a cycle will cancel that cycle and any load settings will be lost. • The door will unlock after a brief pause. NOTE •...
  • Page 24 24 OPERATION Time and Status Display Cycle Status Indicators • These LEDs will blink when a cycle is selected to indicate which stages will run. • When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain steady.
  • Page 25: Wash Cycles

    OPERATION Wash Cycles The wash cycles are designed for specific types of wash loads. Select the cycle that best matches the load contents for maximum wash performance and fabric care. See Sorting Laundry section for best results, and follow the fabric care labels on your garments. For a guide to fabric care symbols, see Sorting Laundry section.
  • Page 26 26 OPERATION Cycle Bedding Spin Speed Default: Medium Available: Medium, Low, No Spin Soil Level Default: Normal Available: All Cycle Bright Whites Description This cycle is for washing white items only. (less than 15 lb (6.8 kg)) Wash Temp. Default: Hot Available: Hot, Warm, Cold, Tap Cold Spin Speed Default: High...
  • Page 27 • The default cycle is Small Load, used for normally soiled loads with a few items. This cycle is also available for download. • Refer to the LG ThinQ application to see the cycles available for download. Wash Temp. Default: Warm...
  • Page 28 28 OPERATION TurboWash Cycle Steam Cold Wash Extra Rinse Pre-wash Bedding Bright Whites Allergiene Delicates Perm. Press Towels Sportswear Speed Wash Downloaded default : Small Load...
  • Page 29: Cycle Modifiers

    OPERATION Cycle Modifiers Spin Higher spin speeds extract more water from clothes, reducing drying time and saving energy. About Modifier Buttons • Press the Spin button repeatedly until the Each cycle has default settings that are selected desired speed is selected. automatically.
  • Page 30 • Once this function is set, all buttons are locked except the Power button. • To connect the washer to the LG ThinQ application, press and hold the Delay Wash • When the controls are locked, and the button for 3 seconds.
  • Page 31 OPERATION Cold Wash WARNING Press the Cold Wash button to save energy by • Do not attempt to force the door to open when using cooler water. It will increase the wash and locked. Doing so could result in damage to the rinse times to maintain wash performance.
  • Page 32: Smart Functions

    Internet service provider or refer to your • Settings wireless router manual. - Set various options on the appliance and in the • LG ThinQ is not responsible for any network application. connection problems or any faults, malfunctions, or errors caused by network connection.
  • Page 33 Start a cycle from the LG ThinQ application on radio communications. However, there is no your smartphone. guarantee that interference will not occur in a particular installation.
  • Page 34: Smart Diagnosis Tm Function

    FCC RF Radiation Exposure LG Electronics will also provide open source code Statement to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of...
  • Page 35 SMART FUNCTIONS troubleshooting data to a smartphone using the LG ThinQ application. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application. Using Audible Diagnosis to...
  • Page 36: Maintenance

    36 MAINTENANCE MAINTENANCE • Wipe with a damp cloth. WARNING • Do not touch the surface or the display with • To reduce the risk of fire, electric shock, or injury sharp objects. to persons, read this entire owner’s manual, including the SAFETY INSTRUCTIONS, before operating this appliance.
  • Page 37 MAINTENANCE Leaving the Door Open • Do not exceed the maximum fill line when adding bleach or powdered cleaners. After you finish using the washer, leave the door Powdered cleaners may remain in the drum open overnight to allow air to circulate and dry the after cleaning.
  • Page 38 38 MAINTENANCE Replace the drawer. CAUTION • Do not use the washer without the inlet filters. Doing so will cause leaks and malfunction. • If you use the washer in an area with hard water, the inlet filter may clog due to lime buildup and require more frequent cleaning.
  • Page 39 MAINTENANCE Cleaning the Drain Pump Filter The washer fails to drain if the drain pump filter is clogged. Periodically clean the drain filter to prevent clogging with foreign objects. WARNING • Opening the drain filter will result in water overflowing if there is water in the drum. Use a bucket if the drum is not completely drained before you open the drain filter.
  • Page 40: Care In Cold Climates

    40 MAINTENANCE Care in Cold Climates Dry the drum interior with a soft cloth, and close the door. Storing the Washer Store the washer in an upright position. If the washer will not be used for an extended period of time and is in an area that could be exposed to freezing temperatures, follow these Remove the inserts from the dispenser.
  • Page 41 MAINTENANCE When the Drain Hose is Frozen Pour hot water in the washer drum and close the door. Wait for 1 - 2 hours. Press the Power button. Press the Spin button to operate spin only cycle for draining and spinning. Press the Start/Pause button to make sure the water drains.
  • Page 42: Troubleshooting

    42 TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the washer does not function properly or does not function at all, check the following before you call for service.
  • Page 43 TROUBLESHOOTING Problem Possible Cause & Solution The load is too small. • Add additional items to allow the washer to balance the load. UNBALANCE ERROR Heavy articles are mixed with lighter items. • Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning.
  • Page 44 44 TROUBLESHOOTING Problem Possible Cause & Solution Vibration sensor malfunctions. • Call for service. VIBRATION SENSOR ERROR Noises Problem Possible Cause & Solution Clicking Door lock sounds when the door locks or unlocks. • Normal operation Spraying or hissing Water spraying or circulating during the cycle •...
  • Page 45 TROUBLESHOOTING Problem Possible Cause & Solution Banging noise when Plumbing in the home moves or flexes when the water valves in the washer shut off. the washer is filling • Water hammer is not caused by a defect in the washer. Install water hammer arrestors with water.
  • Page 46 46 TROUBLESHOOTING Problem Possible Cause & Solution Incomplete or no Detergent compartments clogged from incorrect filling. dispensing of • Make sure that detergent and additives are put into the correct dispenser compartments. detergent • For all detergent types, always make sure that the dispenser drawer is fully closed before the start of the cycle.
  • Page 47 TROUBLESHOOTING Problem Possible Cause & Solution Washer stops for a A motor protection device has been activated to prevent overheating of the motor. few minutes and • This is normal. If the motor protection device activates, the washer will stop for a few then restarts.
  • Page 48 48 TROUBLESHOOTING Problem Possible Cause & Solution Wrinkling Washer is overloaded. • The washer can be fully loaded, but the drum should not be tightly packed with items. The door of the washer should close easily. Hot and cold water inlet hoses are reversed. •...
  • Page 49 TROUBLESHOOTING Problem Possible Cause & Solution Odor Using the dry function, odors can occur from lint and other laundry matter sticking to the heater. (Dryer model only) • This is not a malfunction. A particular odor can occur from drying wet clothes with hot air. (Dryer model only) •...
  • Page 50: Limited Warranty

    Should your LG Washer (“Product”) fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product. This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only when purchased lawfully and used within the United States including U.S.
  • Page 51 Or by mail: LG Electronics, P.O. Box 240007, Huntsville, AL 35813 ATTN: Customer Service PROCEDURE FOR RESOLVING DISPUTES: ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND NOT IN A COURT OF GENERAL JURISDICTION.
  • Page 52 Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG Electronics, USA, Inc. Attn: Legal Department-Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
  • Page 53: Canada

    ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING DISPUTES” BELOW. Should your LG Washer ("Product") fail due to a defect in materials or workmanship under normal and proper use, during the warranty period set forth below, LG Electronics Canada, Inc. ("LGECI") will, at its option, repair, replace or pro rate the Product upon receipt of proof of the original retail purchase.
  • Page 54 (ASC), as determined by LG Canada. If your Product is located outside a 150 km radius from a ASC, as determined by LG Canada, it will be your responsibility to bring the Product, at your sole expense, to the ASC for in-warranty repair.
  • Page 55 If you and LG are unable to resolve the dispute within 30 days of LG’s receipt of the Notice of Dispute, the dispute shall be resolved by binding arbitration in accordance with the procedure set out herein.
  • Page 56 If you prevail in the arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the foregoing, if applicable law allows for an award of reasonable attorneys’...
  • Page 57 Memo...
  • Page 58 58 Memo...
  • Page 59 Memo...
  • Page 60 LG Customer Information Center For inquiries or comments, visit www.lg.com or call: U.S.A. 1-800-243-0000 1-888-542-2623 CANADA Register your product Online! www.lg.com...

This manual is also suitable for:

Wm8980hva.asseeusWm8900hba.ableeusWm89 0h seriesWm8900hba

Table of Contents