Identifier
Status
Replacing the back cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the tabs on the back cover with the slots on the inner frame.
2
Slide the back cover towards the bottom of the computer and snap the back
cover in place.
3
Tighten the captive screws that secure the back cover to the inner frame.
22
GUID-411D5FFA-086D-432E-9CE3-0ECBF9B7BA71
Released
computer. After working inside your computer, follow
After working inside your
GUID-5D9B8709-778A-4903-BD7B-77C0D8FB1527
Released
computer. For more safety best
www.dell.com/
Before