Replacing the stand
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Easel stand
1
Insert the tabs on the stand bracket into the slots on the system-board shield.
2
Align the screw holes on the stand with the screw holes on the system-board
shield.
3
Replace the four screws (M3x5) that secure the stand to the system-board
shield.
4
Replace the stand cover.
5
Place the computer in its upright position.
Pedestal stand
1
Insert the tabs on the stand bracket into the slots on the system-board shield.
2
Align the screw holes on the stand with the screw holes on the system-board
shield.
3
Replace the four screws (M3x5) that secure the stand bracket to the system-
board shield.
4
Replace the stand cover.
5
Place the computer in its upright position.
18
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before