Mitsubishi LT-46149 Owner's Manual page 60

60 6. NetCommand IR Control
Guide Displaying the Disc Menu (DVD or high-defini- While watching the device. 3ress GUIDE t o display the
tion disc format) disc menu.
"Learn" the DiSC MENU, TOP MENU, or other key as
named on the original remote in the Guide learn-
ing position.
Displaying the On-Screen Program Guide
(cable box or satellite receiver)
1. "Learn" the GUIDE k ey on the original remote in
the Guide learning position.
2. Learn the PAGE/_and PAGE V keys of the
original remote in the Page Up and Page Dn
learning positions.
Page Up Using Page Up/Down
Page Dn If the device's original remote control has separate
keys for Channel Up/Dn and Page Up/Dn, the TV
remote control's CH/PAGE A/V key can work like
the two separate keys.
1. "Learn" CHANNEL/\/V in the Channel U p/Dn
positions.
2. "Learn" PAGE/_/V in the Page Up/Dn posi-
tions.
Enter
,
2.
While watching the device, press GUIDE t o
display the guide.
Press OH/PAGE/_/V to send the Page Up/Dn
commands for the guide.
• Inside the Guide
Press CH/PAGE/_/V to send the Page Up/Dn
commands.
, Outside the Guide
Press OH/PAGE A/V to send the Channel Up/
Dn signal.
Enter Functions (cable boxes, satellite receivers, etc.)
Some devices have two keys that have "enter" functions. One key is for menus and is often labelled
SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand uses
the same ENTER key for both operations.
When ENTER h as a menu or guide function or when 1.
the original remote control uses the same key for
menus and channel selection: 2.
Learn the ENTER, SELECT, or OKkey in the
NetCommand Enter learning position.
Press MENU or GUIDEto display the device's menu
or guide.
Press ENTER within the menu and NetCommand
will send the Enter signal for menus.
Enter (digits) When ENTER i s for channel changes, Le., the original Press digit key(s) and then press ENTER.
remote control has a separate ENTER k ey for this NetCommand will send the Enter signal for channel
function): selection.
Learn the ENTER key for channel selection in the
NetCommand Enter (digits) learning position.
Use this learning position only if the original
remote control has separate keys for Enter in
menus and Enter for channel selection.
Cancel CANCEL as the Cancel or Exit Function
"Learn" the Cancel or Exit function in the
NetCommand Cancel learning position
-- The symbol "--" can serve as the separator
(separator) between a digital channel's main and sub-
channel digits, e.g., digital channel 12-1 (main
channel is 12, sub-channel is 1).
"Learn" the channel separator function in the
NetCommand- (separator)learning position.
1. Press MENU or GUIDE t o display the menu or guide.
2. Press _ and NetCommand will send the
Cancel or Exit signal.
Press digit key(s) and press _. NetCommand
will send the channel-separator signal.