Mitsubishi LT-46149 Owner's Manual page 18

18 2. TV Setup
Connecting a Computer to the TV
Use one of the connection methods listed below based
on your computer's video output.
Digital DVl DVI-to-HDMI cable Stereo audio
or an HDMI cable cables
with an HDMI-to-
DVl adapter
Note: If the computer's audio output
is a single mini jack, a mini audio-to-
RCA-male "Y" adapter cable is also
required.
HDMI HDMI-to-HDMI No additional
cable audio connec-
tion is required.
1, See the TV specifications in Appendix B to confirm
that your computer signal is compatible with the TV.
Connect the computer's digital signal output to one
of the TV's HDMI jacks. See the connection dia-
grams for the method suited to your equipment.
3, Connect the computer's audio output using one of
these options:
• For digital DVI signals, connect analog left/right
audio to the TV's DVI PC AUDIO INPUT jacks.
• For HDMI signals, no additional audio connec-
tion is required.
4, Power on the TV and computer. The TV will detect
the connection and display the Auto Input Sensing
screen.
G_
In theAuto Input Sensing screen, press A V to
highlight PC in the list of device types. It is impor-
tant to use the name PC so that the TV can process
the video signal correctly.
Press EXIT to close the Auto Input Sensing screen.
Computer with
DVI and stereo
audio outputs
=
=
=
=
A DVI connection from a personal computer requires a
separate audio connection. Computer connected to the
TV main panel (above).
Computer with
HDMI audio/video
output
=
_i ? i? ii : :!i?i _ iii_
"iV main panel
An HDMI-to-HDMI connection carries all video and
audio on a single cable,