Mitsubishi LT-46149 Owner's Manual page 48

48 5. TV Menus
Clock
If you have enabled the TV Guide Daily system, there is
no need to set the clock; settings are grayed out and
unavailable.
If TV Guide Daily is not enabled, set the clock if you
wish to:
• UsetheTV's Timer function.
Maintain accurate ChannelView listings.
Use either the manual or auto method to set the clock.
i !iiiiii
Setup menu, Clock options
Clock
Settings
Time
(Manual
option only)
Date
('Manual
option only)
Time Zone
Daylight
Savings
Time
• ii
Manual. To set the clock manually:
1. Select Manual.
2. Set the time of day.
3. Set the date.
4. Select your time zone.
5. Select either Applies or ignore for Daylight Savings Time.
Note: If using Manual, each time the time change occurs, you must open this
menu and set the TV's clock ahead or back.
Auto. To set the clock automatically:
1. Select Auto.
2. Select your time zone.
3. Select either Applies or Ignore for Daylight Savings Time.
4. After exiting the menus, tune the TV to an analog station on ANT 1 or ANT 2
carrying XDS data, typically a PBS station.
Note:
• With the Auto setting and Applies selected for Daylight Savings Time, the TV's
clock adjusts automatically to daylight savings time.
• The TV's clock will be reset if you tune to a channel sending incorrect time data.
To prevent unwanted clock resets, first use the Auto method to set the clock
from a channel sending the correct time, then change the method to Manual.
1. With the hour highlighted, press A y repeatedly to change the hour and the
AM/PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to set the hour.
3. With the minutes highlighted, press A Y to change the minutes. Press and
hold to change the minutes display quickly.
1. With the month highlighted, press A V to select. Press ENTER to set.
2. With the day highlighted, press A V to select. Press ENTER to set.
3. With the year highlighted, press A V to select the current year.
Eastern, Central,
Mountain,
Pacific, etc.
Applies
ignore
Required for both the Manual and Auto methods.
Required for both the Manual and Auto methods. Select
the option for your area.