Tvconnections; Before You Begin; Cable Management - Mitsubishi LT-46149 Owner's Manual

TVConnections
Before You Begin
Auto lnput Sensing
The TV's Auto input Sensing feature automatically rec-
ognizes most connections and prompts you to identify
the type of device connected. See page 14 for more on
Auto Input Sensing.
Connection Types
Review the connection types available on your input
devices and use connections that will give the best
video quality. For example, choose HDMI over compo-
nent video, and choose component video over S-video
or composite video.
Picture Quality
For best picture quality, route signals directly from
the input device to the TV; avoid routing video signals
through an A/V receiver, for example.
Surround Sound
For best surround sound audio quality, route audio-
signal cables or HDMI cables from the source device
directly to your A/V receiver or sound system.
Cable Management
One cable tie with a locking pin is supplied with the acces-
sories. Use the tie to keep cables properly organized and
connected.
Installing the Cable Tie
1, Remove the locking pin from the cable tie and
insert the anchor prongs into the hole on the back
of the TV.
Reinsert the pin in the cable tie to secure the tie to
the TV.
Cable Routing
%
Cable routing on
back of TV
Be sure to leave enough cable s ack below the cable tie
to allow the TV to swivel freely, Without enough slack,
there isa risk of damaging the cables and the TV,
Unlatching the Cable Tie
Pry up the latch tab and push or pull
the free end of the tie through the
latch.
You may be able to lift the latch tab
by pinching the tab and latch body
between your thumb and index finger.
You may find it easier to pry up the
latch tab using a plastic wallet card or
similar object.
Pry up tab
to release