Mitsubishi LT-46149 Owner's Manual page 49

5. TVMenus 49
Setup Menu, continued
Timer
Energy
Timer On, Off
Use the Timer to set a time for the TV to turn on automatically. Use this menu to set a day, time,
=nput, and channel for the Timer. If the TV is already on at the requested time, the TV will automati-
cally tune to the designated channel.
o The TV clock must be set before you can use the Timer feature.
TV Energy Mode must be set to Fast Power On to have the TV power on at the set time.
To open the Timer menu. highlight the Timer icon _ in the Setup menu and press ENTER.
When the Timer turns on the TV. press any key on the remote control to keep it on. Otherwise,
the TV will turn off after five minutes.
• The POWER indicator on the front of the TV flashes slowly when the TV is off to indicate the TV
Timer has been set.
Day Daily, Mon=Fri. (every) Sunday, (every) Monday, (every) Tuesday, etc.
Select the day or days of the week for the Timer to turn on the TV.
Time To set the time for the TV to come on:
1. With the hour highlighted, press A V repeatedly to change the hour and the AM/
PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to highlight the minutes.
3. Press A V to change the minutes. Press and hold to change the minutes display quickly.
input Ant-l, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined
and enabled inputs that appear in the Input Selection menu.
Channel
Energy
Mode
If the input is an antenna (ANT 1. ANT 2), enter a channel number in any of three ways:
Enter the number using the remote control's number keys.
- PressAV repeatedly
Press and hold A V to scroll quickly through the available channel numbers.
Fast Power On Use the Energy Mode option to select the level of
power consumption while the TV is turned off.
The default setting is Fast Power On.
Low Power Low Power uses less energy, but TV power-
on takes longer and some TV features may be
unavailable. See the comments below.
Keep Energy Mode set to Fast Power On if you need to:
Have faster power on.
Receive updates to ChannelView channel listings.
- Receive updates to TV Guide Daily listings.
Keep the TV Clock accurate for the TV Timer. With the Low Power setting, you must reset the
TV Clock if the TV is left turned off for over 48 hours.
Use the External Controller Input Wired IR option (see page 9).
Note: TV Guide Daily and CableCARD require the Fast Power On setting. If you activate TV Guide
Daily or use a CableCARD. the TV will automatically override a Low Power setting and change to
the Fast Power On setting.