Oven Racks - Maytag MER6871AAW User Manual

OVEN VEHT
When the oven is in use, the area near
the vent may feel warm or hot to the
touch. NEVER block the vent opening.
OVEN VENT LOCATION
When high moisture foods are cooked
in the upper oven,steam may be visible
coming from the oven vent. This is
normal.
OVEN RACKS
All racks are designed with a lock-stop
edge.
UPPEROVEN
Is equipped with one rack and rack
position.
> When pulling the
upper oven rack
out to remove or
check food, grasp
thetopedgeofthe
rack.
LOWER
OVEN
Conventional: Is equipped with one
RollerGlide
TM
rack and one regularflat
rack.
> Convection (selectmodels): Isequipped
with one RollerGIide
TM
rack and two
regular flat racks.
To
REMOVE OVENRACKS:
Pull rack straight out until it stops at the
lock-stop position; lift up on the front ofthe
rack and pull out.
> For RotlerGlide
TM
rack, pull both the rack
glide and rack base out together.
To
REPLACEOVENRACKS:
Place rackon the rack support inthe oven;
tilt the front end up slightly; slide rack back
until it clears the lock-stop position; lower
front and slide back into the oven.
RACKPOSITIONS
Three-rack Convection
Baking (Racks 1, 3 and 5)
-- 5
-- 4
3
-- 2
i 1
RACK 4:
Use for two-rack baking and for broiling.
RACK 3:
Use for most baked goods on a cookie
sheet or jelly roll pan, layer cakes,
fruit pies, or frozen convenience foods,
and for broiling.
RACK 2:
Use for roasting small cuts of meat,casse-
roles, baking loaves of bread,bundt cakes
or custard pies, and two-rack baking.
RACK 1:
Use for roasting large cuts of meat
and poultry, frozen pies, dessert
souffles or angel food cake, and two-
rack baking.
Multiple Rack Cooking:
Two rack: Use rack positions2 and 4,
or 1 and 4.
Three rack: (convection baking only,
selectmodels) Userack positions 1,3
and 5. (See illustration.)
HALFRACK ACCESSORY
(LOWER OVEN)
A half rack, to increase oven capacity, is
available as an accessory. It fits in the
left, upper portion of the oven and pro-
vides space for a vegetable dish when a
large roaster is on the lower rack. Con-
tact your Maytag dealer for the
"HALFRACK" Accessory Kit or call
1-800-688-8408 to order.