Coil Elements And Burner Bowls - KitchenAid YKERI201 Use & Care Manual

A .....................
A. Single size
A
Coil elements should be level for optimal cooking results. Burner
bowls, when clean, reflect heat back to the cookware. They also
help catch spills.
Cookware should not extend more than 1" (2.5 cm) over the coil
element. If cookware is uneven or too large, it can produce
excess heat causing the burner bowl to change color. For more
information, see the "General Cleaning" section.
NOTE: Before removing or replacing coil elements and burner
bowls, make sure they are cool and the control knobs are in the
Off position.
To Remove:
1. Push in the edge of coil element toward the receptacle. Then
lift it just enough to clear the burner bowl.
A. Single size
B. Dual size
The Dual-Size Elements offer flexibility depending on the size of
the cookware. Single size can be used in the same way as a
regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware,
large quantities of food and home canning.
To Use SINGLE:
1. Push in and turn knob clockwise from the OFF position to the
SINGLE zone anywhere between LO and HI.
2. Turn knob to OFF when finished.
To Use DUAL:
1. Push in and turn knob counterclockwise from the OFF
position to the DUAL zone anywhere between L© and HI.
2. Turn knob to OFF when finished.
OFF
\
Hi Hi
2.
Pull the coil element straight away from the receptacle.
3. Lift out the burner bowl.
To Replace:
1. Line up openings in the burner bowl with the coil element
receptacle.
\
2. Holding the coil element as level as possible, carefully push
coil element terminal into the receptacle.
3. When the terminal is pushed into the receptacle as far as it
will go, push down the edge of the coil element opposite the
receptacle.
10