Window Priority Submenu; Window Text Submenu - Extron electronics Multi Video Processor MVP 104GX User Manual

Window Priority submenu

The priority of each window determines if a
window is displayed in front (priority A) or further
back (priorities B, C and D, with D being furthest
back).
While this submenu is active, all Input button
LEDs blink green. Change the priority (A, B, C, or
D, with A being the highest [top] priority and D
being the lowest [bottom] priority) of all 4 output
windows (1, 2, 3, 4) by rotating the Vertical sizing
knob to select the window. The green LED for each
active window lights as it is selected.
The window number follows each priority, with the
currently selected window being bracketed by the <
> symbols, e.g. A1 B <3> C4 D2, where window 1 is
first in priority, window 3 (currently selected) is
second in priority, window 4 is third in priority, and
window 2 is last in priority.
To change the priority of any window, select the
window by rotating the Vertical sizing knob ( <>
brackets designate the currently selected window)
and press Input button 1, 2, 3, or 4, depending on
whether the window will be changed to 1, 2, 3, or 4,
respectively, for that priority (A, B, C, or D). Repeat
this process to change the priority of any window.
Press the Next button to advance to the Window
Text submenu, or press the Menu button to exit the
Window Priority submenu and proceed to the
Genlock menu.

Window Text submenu

This submenu allows text to be displayed in each
window. While this submenu is active, the green
LED for the Store button will continually blink. After selecting a window
by pressing the Active window selection button (1, 2, 3, or 4), change the
window text by rotating the Horizontal sizing knob to select the character
position (up to 16 characters long), then rotate the Vertical sizing knob to
change the character. Fifty-nine alphanumeric characters including a space
are available:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
space !"#$%&'()*+,-./0123456789:;<=>?@
Pressing the Store button deletes the currently selected text character. Press
the Next button to advance to the Text Style submenu, or press the Menu
button to exit the Window Text submenu and proceed to the Genlock menu.
Background Color
Windows Text 1 – 4
#1 Input Mode #2
mode
VCR Mode 1 – 4
Off
Off
System Resetting
Please Wait
MVP 104GX Operation
Advanced
Configuration
color
Window Priority
A<1> B3 C4 D2
1 – 16 characters
Text Style
solid
Text Location
top left
Window Borders
ON <OFF>
Video Format
<NTSC> PAL
mode
On Off Off
Chroma 1 – 4
Off Off On
System Reset
Freeze and Next
Confirm Reset
Freeze and Next
3-13