7
ý
31
SETTING YOUR DESTINATION
Before you travel, you must first select a destination and allow the iCN 630 to plan your route.
There are three main ways that you can program your destination:
Use SHORTCUTS that you have previously programmed for destinations
used on a regular basis.
Set a new DESTINATION by:
-
entering a specific street address
-
selecting the intersection of two streets
-
choosing a Point of Interest such as a hotel, school or hospital
-
using a Favourite destination that you have stored in the unit already
-
picking an address you have recently travelled to.
Take a position STRAIGHT FROM THE MAP and program this as
your destination.
Using a Shortcut
You are able to save your 8 most frequently used destinations as Shortcuts. This is the quickest
and easiest way to set your route.
For information on setting new Shortcuts, refer to Section 9 Programming Shortcuts.
1
From the Main Menu, select SHORTCUTS.
2
Select your previously programmed destination from the Shortcut list. Refer to Section 9
Programming Shortcuts for more information.
3
The iCN 630 will calculate the route from your current position, and take you straight to
the map display.
NAVMAN
iCN 630 user manual-ver 0.12