Screw Mount To Dash - Navman iCN 630 User Manual

ý
Note. Do not use
the screw plate
without the retainer
ring or suction pad.
Suction pad
23

Screw Mount to Dash

1 Choose a position on the dash where the iCN 630 will be clearly visible by the driver.
Follow the safety guidelines at the front of this manual to ensure that the unit does not
obstruct the view of the driver, or interfere with the operation of any airbags and safety
devices in the vehicle.
2 Join the ball foot and sucker pad together by positioning the suction cup centrally on the
sucker pad, and pressing the lever down until it snaps shut.
3 Fit the retainer ring inside the screw plate by sliding the four locating tabs into the
corresponding slots on the underside of the screw plate.
Lever
Suction cup
4 Bring the ball foot up through the centre of the screw plate. Position the ball foot correctly
by sliding the release tab through the slot on the screw plate.
5 Place the assembly into position on the dash. Use the three screws provided to fix the
assembly firmly to the dash.
6 Press the screw caps over the screw heads.
Lever
Release tab
Slot for
release tab
Retainer ring
Screw plate
Screw caps
Screws
NAVMAN iCN 630 user manual-ver 0.12