Navman iCN 630 User Manual page 35

Screens such as Select
POI may have more than
one page to view. In this
example, the screen
displays the first 4 POIs of
a total 9 (1-4 of 9).
Press or select Page
Fwd to view the next 5
POIs on the list.
35
5 Select AREA. To enter an area, choose one of the following:
• In the text entry screen, type in an area of interest. Once you have finished, position
the cursor on the text entry line, and press OK to confirm your selection.
• Alternatively use the up/down toggle button to choose from the list provided, then
press OK to confirm your selection.
6 Once you have entered all the information in the Destination : POI screen, press OK.
7 Press OK to select a POI from the list provided in the Select POI text entry screen.
8 Once the unit has enough information, the details are displayed.
9 Choose one of the following:
• Select GO. The unit will calculate the route and display the POI on the
navigation screen.
• Select SHOW. The unit will not calculate the route, but will simply display the
address using the Map Browser mode. From here you can select this address as
your destination or move around the map to find a different destination. Refer to
Section 7 Setting Your Destination – Straight From the Map for more information.
• Select SAVE. This will allow you to save the destination as a Shortcut or Favourite.
Refer to Section 9/10 Programming Shortcuts/Favourites for more information.
NAVMAN iCN 630 user manual-ver 0.12