Setting Truck Attributes - Navman M-Nav 900 User Manual

the OnlineAVL2 application. If these have been enabled, you can-
not use the M-Nav 900/950 until you enter these details.
IMPORTANT
The M-Nav 900/950 must be in the docking cradle and con-
nected to the Qube tracking device in order for you to
report your driver status to your fleet administrator through
the OnlineAVL2 application. The Navman Wireless icon in
the bottom status bar will show green when the M-Nav has a
connection to the Qube. It shows red when not connected.
If the login screen is displayed, use the onscreen keypad to
enter your Driver PIN (Personal Identification Number), then
select Log In.
If the "Driver Log In Status" screen appears, select the descrip-
tion that best describes your current status (e.g. Driving, Other
Work, Rest Break, etc.). The check shows the current status.
5

Setting Truck Attributes

The M-Nav 950 can store multiple truck profiles that define
the dimensions and cargo of your truck. The Garmin nav-
igation software uses this information to select the best
route for you based on the information in the map data.
However, this information may not be completely accurate.
You are responsible for confirming your route and avoiding
any hazards.
If you wish to use Truck Routing, select Switch Mode and select
Truck/Lorry.
If there is no current vehicle profile, you will be prompted to
create one. Follow the prompts to enter the details of your
truck and save the profile. You can edit your settings from the
Garmin Settings menu.
In this screen you can select an existing profile or switch to a dif-
ferent profile. For more details on setting the Truck Profile
please refer to the Garmin user manual.
NOTE
M-Nav 900/950 | User Guide