Installation Instructions; Style I - Freestanding Outdoor Grill Installation - KitchenAid KFRU368T Use & Care Manual

Do not block access to the shutoff valve.The valve is for turning
on or shutting off gas to the grill.
B
\
%
A. Gas supply line
B. Shutoff valve "open" position
C. To grill
LP Gas Conversion Using a Local LP Gas Supply
Conversion must be made by a qualified person. A qualified
Natural gas technician shall provide the LP gas supply to the
selected grill location in accordance with the National Fuel Gas
Code ANSI Z223.1/NFPA 54 - latest edition, and local codes.
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
/
A
A. Grill gas pipe
B. New CSA International approved
"outdoor" flexible gas supply line
C. Rear of grill
D. To local LP gas supply
LP Gas Conversion Using a 20 Ib LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 Ib LP gas fuel tank must be purchased separately.
INSTALLATION INSTRUCTIONS
3. Remove foam block and wrap from inside the grill.
1. Unpack grill. Remove all packaging materials and remove grill
from wooden skid.
2. Move grill into desired outdoor location.
3. Open the hood.
Remove Packaging Material Inside the Grill
1. Cut the tiedowns holding the grates together.
2. Remove condiment shelf, warming shelf and grill grates from
inside the grill and remove packaging material.
4.
5.
A. Foam block
B. Foam wrap
Replace the grill grates.
Place warming shelf on brackets as shown.
B
A
A. Warming sheff brackets
B. Warming shelf
11