Operation - Fedders 23-23-0381N-002 Installation & Operation Manual

Table of Contents

Advertisement

Available languages

Available languages

Power
OPERATION
_']
ELECTRONIC
CONTROLS
J
Warning
Light
Power
Control
Mode
Control
Dehumidify
Med
FEDDEI
Fan Speed
Control
Display
Timer
Timerfremp
Mode
Control
Controls
Indicators
play
AO
Mode
Power Control
The power control turns the unit on and off.
FanSpeed
Warning
Light
This light indicates that the internal
water tank needs
T,;_
to be drained. The unit will not operate
until the
water has been drained. See the next page of this
__--
owners'
manual for instructions
on how to drain the
TJmor
water.
Mode
Control
The Mode Control
has 3 settings: Cool,Dehumidify,
and Fan.
The settings are adjusted with the Mode Control
button.
A green light will indicate
which setting
is
currently
being used.
(_
Cooling
Mode
Cool
During the cooling
mode the air is cooled and
hot air is exhausted to the outside air through
the exhaust tube.
Fan Speed
The Fan Speed Control has 3 settings:
High, Medium,
and Low.
Timer
Auto turn off:
With machine in fan mode, press timer button
to select number of hours you would
like the unit
to run in airconditioning
mode until it
automatically
shuts off.
Auto turn on:
With machine powered
off, press timer button
to select number of hours until you would
like
the unit to automatically
start running
in
airconditioning
mode.
__OvTimer/Temperature
buttons
Used for adjusting
the timer and thermostat.
The default
display is room temperature.
Dehumidify
Adjust fan speed and temperature
to suit your
desired comfort
level.
Dehumidify
Mode
Air is dehumidified
as it passes through
air
conditioner,
without
being in full cooling
mode.
(Note: The warm air exhaust
hose must vent inside
the room when using Dehumidify
Mode, not
outside as it does when cooling.
If the unit is
vented outside some cooling
will occur.)
Fan Mode
Air is circulated
throughout
the room with no
cooling.
(Note: unit does not need to be vented in
Fan mode.)
When "+" or "-" button
is pressed, the set
temperature
is displayed and may be adjusted.
After
15 seconds the display will revert back to room
temperature.
By depressing
both buttons
at once, the display will
toggle
between
Celsius and Fahrenheit.
5

Advertisement

Table of Contents
loading

Table of Contents