Table of Contents
Advertisement
Available languages
Available languages
Operation
Before starting
this unit
1. Select a suitable
location,
making sure you have a level surface with
no obstructions,
and easy access to an electrical
outlet.
2. Install the window
adapter
kit, as described in the Installation
section.
Note: The window
adapter
kit is required only while using the Cool mode.
3. Plug the unit into a grounded
electrical
outlet.
Do not use an extension cord.
Operating
Instructions
Air Conditioner/Cool
Mode
1. Install the widow
adapter
kit and hoses to the unit.
2. Press the On/Off
button
to turn the unit on. The unit will
power up and display the room temperature.
3. Press the Mode button
until the green indicator
light shines.
4. Press the
Temp/Timer
Set buttons
to set the
desired
temperature.
While you are adjusting
the setting,
the Set
Temperature
indicator
will shine and the
display will show
the set temperature.
After you have finished
adjusting
the
temperature,
the
display
will
default
back to the
room
temperature
and the "Room Temp" indicator
will shine.
5. Press the Fan Speed button
to select the
desired setting
(High, Med, Low). The fan speed indicator
light will shine
for the selected speed.
6. Condensed water
may accumulate
in the unit. If the internal
tank becomes full, the warning
light will shine and the unit
will
not
operate
until
the
unit
has been
drained.
See
Draining
Excess Water
section
for instructions
on how to
drain the water.
7. Once the room reaches the set temperature,
the compressor
will turn off and the fan will continue
to operate.
Dehumidify
Mode
1. Press the On/Off
button to turn the unit on. The unit will
power up and display the room temperature.
2. Press the Mode button
until the orange
indicator
light
shines above the word Dehumidify.
3. Condensed
water
may accumulate
in the
unit.
If the
internal
tank becomes full, the warning
light will shine
and the unit will not operate
until the unit has been
drained.
See Draining
Excess Water section.
4. The fan will operate
in Med speed. Fan speed is not
adjustable
in Dehumidify
mode.
Fan Mode
1. Press the On/Off
button to turn the unit on. The unit will
power up and display the room temperature.
2. Press the Mode button
until the yellow
indicator
light
shines.
3. Press the Fan Speed button
to select the desired setting
(High, Med, Low). The fan speed indicator
light will shine
for the selected speed.
4. The unit will operate continuously
in Fan mode.
Timer
The timer can be set to turn the unit off or on. The timer is
adjustable
between
1 and 12 hours.
To turn unit off automatically:
1. With unit running
in desired mode, press timer button.
2,
Use Temp/Timer
Set buttons
to select number of hours
you would
like the unit to run until it automatically
shuts off. After you have finished
adjusting
the timer,
the display will default
back to the room temperature
and the "Room Temp" indicator
will shine. Timer
indicator
will blink when set. To turn timer off press the
timer button.
To
1.
2,
turn unit on automatically:
With unit powered
on select desired mode and fan
speed, then power unit off.
With machine
powered
off, press timer button
to select
number
of hours until you would
like the unit to
automatically
start running
in air conditioning
mode.
Timer indicator
will blink when set. The display will
show the number of hours the unit is set until it begins
operation.
To turn timer off press the timer button.
7
Advertisement
Table of Contents
