Download  Print this page

Installation - Kenmore 565.68380 Owner's Manual

Hide thumbs

Advertisement

Table of Contents
Turntable Installation
Place the roller rest on the cavity
bottom.
The turntable
hub should be
securely
locked in the receptacle.
Never place the turntable
upside
down.
The tumtable rotation should never
be restricted.
Place the turntable
on top of the
roller rest as shown in the diagram.
Both turntable
and roller rest must
always
be used during cooking.
All food and containers
of food are
always
placed on this turntable for
cooking.
• This turntable
rotates clockwise
or
counterclockwise;
this is normal.
Turntable
Hub(underside)
Roller rest
Receptacle
INSTALLATION
Remove
all packing
material and accessories.
Examine the oven for any damage
such as dents or broken door.
Do not install if oven is damaged.
OPEN
,
Select a level surface
that provides enough open space for the intake and/or
p_let
vents.
A minimum
clearance
of 3 inches (7.5 cm) is required between
the oven and
any adjacent
wall. One side must be open.
Leave a minimum
clearance
of 3 inches (7.5 cm) above the oven.
Do not remove the legs from the bottom of the oven.
Blocking the intake and/or outlet openings
can damage
the oven.
Do not install oven over a range, cooktop or other heat-producing
appliance.
2.
Plug your oven into a standard
120-volt / 60-Hz household
outlet.
Be sure the electrical
circuit is at least 15 amperes and that your microwave
oven is the only appliance
on the circuit.
NOTE:-This
unit is not designed
for 50 Hz or any circuit other than a 120-volt/60-Hz
AC%-'_cuit. This oven is designed
for countertop
installation
only. Insertion
into a
cabinet or wall will damage
the product and void the warranty.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

565.68480565.68381565.68481