Radiant Glass - Kenmore 665.9214 Use & Care Manual

Hide thumbs Also See for 665.9214:
Table of Contents

Advertisement

Available languages

Available languages

To Start Self-Clean:
Before self-cleaning,
make sure the door is closed completely
or
it will not lock and the cycle will not begin.
1. Press SENS-A-CLEAN.
The SEnS setting will automatically
determine the length of
cleaning time.
2. Press STAR]_
The oven door will lock in 6 seconds and "CLN SENS,"
"HEAT," "ON," "LOCKED," and "CLEAN" will appear on the
display. The door will not unlock until the oven cools. The
cycle time includes a 30 minute cool down time.
When the cycle is complete and the oven cools, "End" will
appear on the display and "LOCKED" will disappear.
3. Press STOP/CLEAR or open the door to remove "End" from
the display.
4. Close door.
The time of day will appear on the display.
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the clock is set to the
correct time of day. See "Clock" section. Also, make sure the
door is closed completely
or it will not lock and the cycle will not
begin.
1. Press SENS-A-CLEAN.
The SEnS setting will automatically
determine the length of
cleaning time.
If desired, set the appropriate
soil level by repeatedly
pressing the SENS-A-CLEAN
pad.
2. Press DELAY START.
Press HOUR/MIN "up" or "down" arrow pads to set the time
of day to start the Self-Cleaning cycle.
3. Press START.
The door will automatically
lock, and "LOCKED," "DELAY"
and the time of day will appear on the display.
When the start time is reached, the oven will automatically
turn on.
When the cycle is complete and the oven cools, "End" will
appear on the display and "LOCKED" will disappear.
4. Press STOP/CLEAR or open the door to remove "End" from
the display.
5. Close door.
The time of day will appear on the display.
To Manually
Set Soil Level:
Press twice for light soils, and "SoilL" will appear on the
display.
Press three times for average soils, and "SoilA" will appear
on the display.
Press four times for heavy soils, and "SoiIH" will appear on
the display.
The oven light will not work during the Self-Cleaning cycle.
To Stop Self-Clean
any time:
Press STOP/CLEAR, and "cln," "ON," "cool" and "LOCKED" will
appear on the display until the oven cools. Then "End" will
appear and the door will unlock.
IMPORTANT:
Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad: Gently clean around the model and serial number plate
because scrubbing may remove numbers.
RADIANT GLASS
Do not use steel wool, abrasive powder cleansers, chlorine
bleach, rust remover or ammonia because damage may occur.
Always wipe with a clean, wet cloth and dry thoroughly to prevent
streaking and staining.
A blue 3M SCOTCH-BRITE ®no scratch scrub sponge supplied
with your range is also recommended
for stubborn soils. This pad
is designed specifically to keep your radiant glass clean. Do not
use this pad to clean any other surfaces.
A Cooktop Scraper is also recommended
for stubborn soils, and
can be ordered as an accessory. Ask for stock number
22-364-WXl
0X302 when ordering. The Cooktop Scraper uses
razor blades. Store razor blades out of the reach of children.
Cooktop Cleaning Creme should also be used regularly to help
prevent scratches,
pitting and abrasions and to condition the
cooktop.
It can be purchased as a kit along with the Cooktop
Scraper. Ask for stock number 22-364-WX10X117
when
ordering.
Light to moderate soil
Paper towels or blue 3M SCOTCH-BRITE ° no scratch scrub
sponge: Clean while the cooktop is still warm. You may want
to wear oven mitts while doing so.
Sugary spills (jellies, candy, syrup)
Clean up sugary spills and soils as soon as hot surface indicator
light goes off. If not wiped up while warm, surface pitting can
occur.
Blue 3M SCOTCH-BRITE ®no scratch scrub sponge: Clean
while the cooktop is still warm. You will want to wear oven
mitts while doing so.
Cooktop Scraper, Cooktop Cleaning Creme and clean damp
paper towel: Clean as soon as cooktop has cooled down.
Rub creme into surface with a damp paper towel or soft
cloth. Continue rubbing until white film disappears.
Heavy soil, dark streaks,
specks and discoloration
Cooktop Scraper, Cooktop Cleaning Creme or nonabrasive
cleanser: Rub product into soil with a damp paper towel or
soft cloth. Continue rubbing until white film disappears.
ii_i!!iiiiiiiiiiiii
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents